PVC card Embosser technology with general printers

The advantage of this technology: 1. Easy to use – double card. 2. There is no need for special printers and special inks. 3. A printer and a general guarantee of hot rolling of high quality paper with a clear image 4. Suitable for small quantities of paper to process quickly – Card Embosser Illustration papermaking course: three types of materials including material1: A material pinting (translucent) Material2: PVC core material B (White) Material3: Back on the publication of C (translucent) image print (print the image on the opaque surface of the print media rather than the smooth surface with a film) the printed image to dry for 4-5 minutes. (Make sure the surface moisture.) Battery together, from top to bottom: In the press material, PVC core material B, the later printing of C. (Note: the smooth surfaces with a film of material to print and C again media should be exposed outside.) Temperature at 150-180 degrees (just choose a core temperature). Put the leaves piled through the hot mill press together – relief card machine. Cut the PVC laminated sheets of cut, a beautiful card is made. Warning: there is protective film on both sides of the leaves of all measures rolled over. You can get rid of them or not according to the needs of customers. Without spending thousands of dollars in expensive cars, you can perform the same high quality paper. A printer and a hot mill is investing enough.Small. Great deals back! Cut sheets laminated with PVC cutter, a beautiful card is made. Warning: there is protective film on both sides of laminated sheets, when all steps are finished. You can get rid of them or not according to the needs of customers. Cut sheets laminated with PVC cutter, a beautiful card is made. Warning: there is protective film on both sides of the leaves of all measures rolled over. You can get rid of them or not according to the needs of customers.